General Purpose Relays
Industrial Relays
Potter & Brumfield
KUIP/KUGP Series Panel Plug-in Relay
n
n
n
n
10 amp rated relays
2 Form A (NO) and 1-3 Form C (CO) contact arrangement
KUIP 8mm coil-to-contact spacing and KUGP 3mm contact gap
Various mounting and socket styles
Typical applications
Voltage control units
Approvals
UL E22575; CSA LR±5734
Technical data of approved types on request
Coil versions, DC coil
Coil
Rated
voltage
VDC
Operate
voltage
VDC
Coil
resistance
Ω±±10
Rated coil
power
W
code
Contact Data
KUIP
5
6
±2
24
48
±±1
KUGP
5
Contact arrangement
5
6
±2
24
48
±±1
3.75
4.5
9.1
±8.1
36.1
82.5
2±
32.±
±21
472
±811
±1111
±.2
±.±25
±.2
±.25
±.3
KUGP:
KUIP:
Rated voltage
Rated current
Contact material
Min recommended contact load
Frequency of operation
Operate/releases time max.
Bounce time max.
2 form A (NO); 3 form A (NO)
± form C (CO), 2 form A (NO), 2 form C (CO), 3 form C (CO)
241VAC
±1A
Ag
AgCdO
±.25
±11mA, ±2VDC 311mA, ±2VDC
361 ops./hour
21/±5ms
21ms
361 ops./hour
5
6
±2
24
48
±±1
3.75
4.5
9.1
±8.1
36.1
82.5
±4
21
81
321
±251
6721
±.8
±.8
±.8
±.8
±.85
±.8
6
±2
24
48
±±1
Contact ratings
Type
UL 508
Ag
Load
Cycles
All figures are given for coil without preenergization, at ambient temperature +23°C.
5A, 241VAC
5A, 28VDC
±/6HP, ±21VAC
2.5A, ±21VAC, tungsten
±/3HP, 241VAC
Coil versions, AC coil
Coil
code
Rated
voltage
VAC
Operate
voltage
VAC
Coil
resistance
Ω±±50
Rated coil
power
VA
KUIP ± and 2 pole
1.5A, ±21VDC
5FLA, ±5LRA, 251VAC
6
±2
24
±21
241
6
±2
24
±21
241
5.±
±1.2
21.4
±12.1
214.1
6
24
85
2251
9±±1
2.1
2.1
2.1
2.±
2.±
AgCdO
±1A, 241VAC
±1A, 32VDC
5FLA, ±5LRA, 251VAC
±/3HP, ±21VAC
5A, ±21VAC, tungsten
±/2HP, 251VAC
1.5A, ±25VDC
±1FLA, 41LRA, ±25VAC
3A, 611VAC
KUIP 3 pole, KUGP
6
±2
6
±2
5.±
±1.2
21.4
±12.1
214.1
4.2
±8
72
±711
7211
2.8
2.8
2.8
2.9
2.9
24
±21
241
24
±21
241
All figures are given for coil without preenergization, at ambient temperature +23°C.
±/2HP, 481VAC
±/2HP, 611VAC
±HP, 481VAC, 3 phase
Mechanical endurance
Insulation Data
KUIP
KUGP
±1x±16 ops.
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Initial insulation resistance
between insulated elements
±211Vrms
2211Vrms
2211Vrms
3511Vrms
3751Vrms
3751Vrms
Coil Data
Coil voltage range
6 to ±±1VDC
6 to 241VAC
Class B
±11MΩ, 511VDC
Coil insulation system according UL
1
08-2011, Rev. 0811
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company