Document 265-1
Power Chip Inductors
–
0805PS Series
• Shielded power chip inductors
• Excellent current handling for a part this size
For new designs, we recommend the EPL2010,
EPL2014 or LPS3010 as an alternative to this series.
Theyallofferbettercurrenthandling, lowerDCR, lower
profile and a smaller footprint. We will continue to
manufacture and support the 0805PS.
L2
DCR4
max
SRF5
typ
Part
±10% Qmin3
Isat6 Irms7
(A)
number1
(µH) at 1MHz (Ohms) (MHz) (A)
1. When ordering, please specify termination and packaging codes:
0805PS-334KLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
0805PS-102KL_
0805PS-152KL_
0805PS-272KL_
0805PS-332KL_
0805PS-392KL_
1.0
1.5
2.7
3.3
3.9
21
21
21
21
21
0.14
0.18
0.35
0.50
0.74
340
265
190
180
165
0.90 1.6
0.85 1.3
0.60 0.88
0.55 0.70
0.50 0.61
0805PS-472KL_
0805PS-562KL_
0805PS-682KL_
0805PS-103KL_ 10
0805PS-153KL_ 15
4.7
5.6
6.8
21
21
21
21
21
0.85
0.91
1.37
1.51
2.04
155
143
118
66
0.43 0.59
0.38 0.57
0.32 0.46
0.27 0.43
0.22 0.34
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
34
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
0805PS-223KL_ 22
0805PS-333KL_ 33
0805PS-473KL_ 47
0805PS-683KL_ 68
0805PS-823KL_ 82
25
25
25
28
30
2.48
3.00
3.85
4.42
6.00
22
17
15
12
12
0.18 0.33
0.16 0.28
0.15 0.26
0.12 0.24
0.11 0.21
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD-A
fixture in Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
0805PS-104KL_ 100
0805PS-124KL_ 120
0805PS-154KL_ 150
0805PS-224KL_ 220
0805PS-334KL_ 330
32
32
32
32
32
6.96
7.51
8.33
13.71
20.53
9.0 0.10 0.19
7.7 0.10 0.18
5.0 0.08 0.18
5.0 0.07 0.14
3.5 0.06 0.11
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document265-1 Revised08/18/09
© Coilcraft, Inc. 2009