Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 288-1
Chip Inductors – 0805LS (2012)
Halogen
Free
These ferrite core surface mount inductors have lower
DCRandhighercurrentratingsthanour0805CSSeries.
They come in inductance values from 0.078 to 27 µH.
Coilcraft Designer’s Kit C354 contains samples of all
5%inductancetoleranceparts.Toorder,contactCoilcraft
or visit http://order.coilcraft.com to purchase on-line.
Inductance2
(µH)
Percent
tolerance
SRFmin4
(MHz)
DCRmax5
(Ohms)
Irms6
(A)
Color
code
AEC
+
Q200 85°C
Partnumber1
Qmin3
0805LS-78NX_R_
0805LS-111X_R_
0805LS-471X_R_
0805LS-681X_R_
0805LS-102X_R_
0.078@7.9MHz
0.110@7.9MHz
0.470@7.9MHz
0.680@7.9MHz
1.0@7.9MHz
5,2
5,2
5,2
5,2
5,2
19@7.9MHz
19@7.9MHz
19@7.9MHz
20@7.9MHz
20@7.9MHz
1440
1200
500
400
340
0.042
0.05
0.31
0.46
0.69
2.0
2.0
0.720
0.590
0.500
Black
Brown
Red
Orange
Yellow
0805LS-122X_R_
0805LS-152X_R_
0805LS-182X_R_
0805LS-222X_R_
0805LS-272X_R_
1.2@7.9MHz
1.5@7.9MHz
1.8@7.9MHz
2.2@7.9MHz
2.7@7.9MHz
5,2
5,2
5,2
5,2
5,2
15@7.9MHz
20@7.9MHz
20@7.9MHz
20@7.9MHz
20@7.9MHz
280
275
246
106
105
1.20
1.03
1.15
1.28
1.48
0.400
0.490
0.410
0.365
0.350
Brown
Green
Blue
Brown
Violet
0805LS-332X_R_
0805LS-392X_R_
0805LS-472X_R_
0805LS-682X_R_
0805LS-822X_R_
3.3@7.9MHz
3.9@7.9MHz
4.7@7.9MHz
6.8@7.9MHz
8.2@2.5MHz
5,2
5,2
5,2
5,2
5,2
20@7.9MHz
20@7.9MHz
20@7.9MHz
20@7.9MHz
18@2.5MHz
83
52
50
35
27
1.57
1.70
1.87
2.25
2.55
0.330
0.300
0.280
0.260
0.250
Gray
White
Black
Brown
Red
0805LS-103X_R_
0805LS-153X_R_
0805LS-223X_R_
0805LS-273X_R_
10.0@2.5MHz
15.0@2.5MHz
22.0@2.5MHz
27.0@2.5MHz
5,2
5,2
5,2
5,2
18@2.5MHz
18@2.5MHz
18@2.5MHz
15@2.5MHz
21
17
13
11
3.45
5.03
6.18
0.200
0.180
0.150
0.120
Orange
Yellow
Green
Blue
11.04
1. When ordering, specify tolerance, termination and packaging codes:
0805LS-273XJRC
Core material Ceramic/Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver
platinum-glass frit. Other terminations available at additional cost.
Tolerance:
G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: R = RoHS compliant matte tin over nickel over silver-
Weight 12.7– 13.9 mg
platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +100°C (ambient + temp rise).
palladium-platinum-glass frit terminations.
L = RoHS compliant, not halogen-free. Silver-palladium-
platinum-glass frit terminations.
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Packaging:
C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/°C
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000/7″reel; 7500/13″reel; Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Q measured on an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
4. SRF measured using an Agilent/HP 8753D network analyzer with a
Coilcraft SMD-D test fixture.
5. DCR measured on a Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient. Because
of their open construction, these parts will not saturate.This information is
for reference only and does not represent absolute maximum ratings.
7. Electrical specifications at 25°C.
RefertoDoc362“SolderingSurfaceMountComponents”beforesoldering.
Document 288-1 Revised 08/08/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
