Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 197-1
Chip Inductors
–
0805HQ (2012)
Halogen
Free
The 0805HQ Series offers high Q factors and high
inductance in an 0805 size.In addition, current handling
has been improved with significantly lower DCR values.
For even higher Qs and inductance, consider our surface
mount spring inductors that combine the high Q of an air
woundcoilwiththeconvenienceofautomaticplacement.
Like all Coilcraft wire wound ceramic chip inductors,
the 0805HQ Series provides exceptional SRFs, tight
inductance tolerance and batch consistency.
CoilcraftDesigner’sKitC325containssamplesofall5%
inductance tolerance parts.To order, contact Coilcraft or
visit http://order.coilcraft.com.
AEC
+
Q200 125°C
Inductance2
(nH)
Percent
SRF min5
(GHz)
DCRmax6
(Ohms)
Irms7
(A)
Color
code8
Part number1
tolerance3
Q min4
0805HQ-2N5XJR_
0805HQ-5N6XJR_
0805HQ-6N2XJR_
0805HQ-12NX_R_
0805HQ-16NX_R_
2.5 @ 250 MHz
5.6 @ 250 MHz
6.2 @ 250 MHz
12 @ 250 MHz
16 @ 250 MHz
5
5
5
5,2
5,2
80 @ 1500 MHz
98 @ 1500 MHz
88 @ 1000 MHz
80 @ 1000 MHz
72 @ 500 MHz
10.30
6.10
4.75
3.00
2.95
0.020
0.035
0.035
0.045
0.060
1.6
1.6
1.6
1.6
1.5
Black
Brown
Red
Orange
Yellow
0805HQ-18NX_R_
0805HQ-20NX_R_
0805HQ-27NX_R_
0805HQ-30NX_R_
0805HQ-39NX_R_
18 @ 250 MHz
20 @ 250 MHz
27 @ 250 MHz
30 @ 250 MHz
39 @ 250 MHz
5,2
5,2
5,2
5,2
5,2
75 @ 500 MHz
70 @ 500 MHz
75 @ 500 MHz
65 @ 500 MHz
65 @ 500 MHz
2.55
2.05
2.00
1.95
1.60
0.060
0.055
0.070
0.095
0.110
1.4
1.4
1.3
1.2
1.1
Green
Blue
Violet
Gray
White
0805HQ-48NX_R_
0805HQ-51NX_R_
48 @ 200 MHz
51 @ 200 MHz
5,2
5,2
65 @ 500 MHz
65 @ 500 MHz
1.40
1.40
0.095
0.120
1.2
1.0
Black
Brown
1. When ordering, specify tolerance, termination and packaging codes:
Core material Ceramic
Environmental RoHS compliant, halogen free
0805HQ-51NXJRC
Terminations RoHS compliant matte tin over nickel over silver platinum-
Tolerance:
G= 2% J = 5% (Table shows stock tolerances in bold.)
glass frit. Other terminations available at additional cost.
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
Weight 10.5– 12.5 mg
E = Halogen free component. RoHS compliant silver-
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise)
palladium-platinum-glass frit terminations.
L = RoHS compliant, not halogen-free. Silver-palladium-
platinum-glass frit terminations.
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:
C = 7” machine-ready reel. EIA-481 embossed plastic tape
(2000 parts per full reel). Quantities less than full reel
available: in tape (not machine ready) or with leader
and trailer ($25 charge).
Resistance to soldering heat Max three 40 second reflows at +260°C,
parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
D = 13” machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85%
relative humidity)
Packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide, 0.23 mm
thick, 4 mm pocket spacing, 1.65 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous
wash. See Doc787_PCB_Washing.pdf.
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286 impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network
analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz,
measured using an Agilent/HP 8722ES network analyzer and a Coilcraft
SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.This
information is for reference only and does not represent absolute maximum
ratings
8. Each part is marked with a single dot.The color dots are not unique
identifiers and correspond to multiple inductance values.
9. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 197-1 Revised 08/08/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
联发科推出全球首款3纳米汽车芯片CT-X1，挑战高通SA8295
国家大基金减持三家半导体企业，市场反应各异
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
