Document 197-1
Chip Inductors
–
0805HQ (2012)
The 0805HQ Series offers our highest Q factors in an
0805 form factor. In addition, current handling has been
improved with significantly lower DCR values.
For even higher Qs, consider our surface mount spring
inductors that combine the high Q of an air wound coil
with the convenience of automatic placement.
Like all Coilcraft wire wound ceramic chip inductors, the
0805HQ Series provides exceptional SRFs, tight induc-
tance tolerance and batch consistency.
CoilcraftDesigner’sKitC325containssamplesofall5%
inductance tolerance parts.To order, contact Coilcraft or
visit http://order.coilcraft.com.
Inductance2
(nH)
Percent
SRF min5
(GHz)
DCRmax6
(Ohms)
Irms7
(A)
Color
code
Part number1
tolerance3
Q min4
0805HQ-2N5XJL_
0805HQ-5N6XJL_
0805HQ-6N2XJL_
0805HQ-12NX_L_
0805HQ-16NX_L_
2.5 @ 250 MHz
5.6 @ 250 MHz
6.2 @ 250 MHz
12 @ 250 MHz
16 @ 250 MHz
5
5
5
5,2
5,2
80 @ 1500 MHz
98 @ 1500 MHz
88 @ 1000 MHz
80 @ 1000 MHz
72 @ 500 MHz
10.30
6.10
4.75
3.00
2.95
0.020
0.035
0.035
0.045
0.060
1.6
1.6
1.6
1.6
1.5
Black
Brown
Red
Orange
Yellow
0805HQ-18NX_L_
0805HQ-20NX_L_
0805HQ-27NX_L_
0805HQ-30NX_L_
0805HQ-39NX_L_
18 @ 250 MHz
20 @ 250 MHz
27 @ 250 MHz
30 @ 250 MHz
39 @ 250 MHz
5,2
5,2
5,2
5,2
5,2
75 @ 500 MHz
70 @ 500 MHz
75 @ 500 MHz
65 @ 500 MHz
65 @ 500 MHz
2.55
2.05
2.00
1.95
1.60
0.060
0.055
0.070
0.095
0.110
1.4
1.4
1.3
1.2
1.1
Green
Blue
Violet
Gray
White
0805HQ-48NX_L_
0805HQ-51NX_L_
48 @ 200 MHz
51 @ 200 MHz
5,2
5,2
65 @ 500 MHz
65 @ 500 MHz
1.40
1.40
0.095
0.120
1.2
1.0
Black
Brown
1. When ordering, specify tolerance, termination and packaging codes:
0805HQ-51NXJLC
Core material Ceramic
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Tolerance:
G= 2% J = 5% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant without
exemption silver-palladium-platinum-glass frit
terminations.
Weight 10.5– 12.5 mg
Ambient temperature –40°C to +125°C with Irms current, +85°C to
+140°C with derated current
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286 impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network
analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz,
measured using an Agilent/HP 8722ES network analyzer and a Coilcraft
SMD-D test fixture.
PCB washing Only pure water or alcohol recommended
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 197-1 Revised 11/16/10
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
5秒后页面跳转
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
联发科推出全球首款3纳米汽车芯片CT-X1，挑战高通SA8295
国家大基金减持三家半导体企业，市场反应各异
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
