Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 406-1
USB 3.0 Common Mode Choke 0603
Halogen
Free
• For noise suppression in super high speed signal lines: USB
3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high
speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
• Suitable for USB-type C specification 1.0
• Up to 3.7 GHz differential mode 3 dB cutoff frequency; up to
20 dB common mode noise attenuation in GHz range
Designer’s Kit C470 contains 10 each of all 0603USB, 0805USB,
0805USBF, 0805USBN and 1206USB parts
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations Gold over nickel over silver-palladium-glass frit
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Common mode
Common mode
Cutoff
DCR
max4
(Ohms)
attenuation typ (dB)
peak impedance frequency2
Inductance3
min (nH)
Isolation5 Irms6
(Vrms) (mA)
Part number1
(kOhms)
(GHz)
10 MHz 500 MHz 1 GHz
0603USB-251ML_
0603USB-601ML_
0603USB-951ML_
0603USB-142ML_
0603USB-222ML_
>0.10 @ >3.0 GHz
>0.18 @ >3.0 GHz
0.30 @ 2.6 GHz
0.42 @ 1.9 GHz
0.66 @ 1.8 GHz
3.8
3.4
2.8
1.9
0.96
1.31
3.00
4.62
6.85
9.14
3.16
6.88
9.75
12.80
16.53
8.45
13.27
16.06
18.16
20.29
18
37
63
98
150
0.077
0.109
0.142
0.174
0.209
250
250
250
250
250
500
500
500
500
500
0.060 0.003
1,52 0,076
1. When ordering, please specify packaging code:
0603USB-222MLC
1
2
Packaging:C= 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
0.042 0.004
1,07 0,10
4
3
B= Less than full reel. In an effort to simplify our
part numbering system, Coilcraft is eliminating
the need for multiple packaging codes. When
ordering, simply change the last letter of your part
number from B to C.
0.004
0,10
0.023 0.030
0.034
0,86
0.013
0,33
0,58
0,76
0.010
0,25
D= 13″ machine-ready reel. EIA-481 embossed plas-
2
1
4
tic tape (7500 parts per full reel).
1
4
2
3
2 Frequency at which the differential mode attenuation equals −3 dB
3. Inductance measured at 100 MHz using an Agilent/HP 4286A
impedance analyzer and a Coilcraft SMD-A fixture.
0.030 0.003
0,76 0,076
4. DCR is specified per winding.
3
5. Winding to winding isolation (hipot) tested for one minute.
6. Current per winding that causes a 20°C rise from 25°C ambient.
7. Electrical specifications at 25°C.
0.010
0,25
0.012
0,30
Recommended
Land Pattern
These parts have no marking.
inches
mm
Dimensions are in
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Weight 4.9 – 5.2 mg
Packaging 2000 per 7″ reel; 7500 per 13″ reel; Plastic tape: 8 mm-
wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
Document 406-1 Revised 11/14/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.