Document 266-1
Shielded High SRF Inductors
–
0603PS
•ꢀHigher SRF than our other power inductors
•ꢀHigh inductance with tight tolerance
•ꢀExcellent current handling for a part this size
Core material Ceramic/Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Weight 26.4– 27.9 mg
Ambient temperature –40°C to +65°C with Irms current, +65°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR4
max
SRF5
typ
Part
L±±102 Qmin3
Isat6 Irms7
number1
(µH) at±MHz (Ohms) (MHz) (A) (A)
1. When ordering, please specify packaging code:
1613PS-473KLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
0603PS-781KL_
0603PS-102KL_
0603PS-182KL_
0603PS-222KL_
0603PS-272KL_
0603PS-332KL_
0603PS-392KL_
0603PS-472KL_
0603PS-562KL_
0603PS-682KL_
0.78
1.0
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
0.24
0.26
0.54
0.75
0.75
0.88
1.00
1.08
1.23
1.37
1.43
1.60
1.92
2.96
5.63
475
390
155
245
127
72
72
64
51
39
30
30
22
16
12
0.55 1.30
0.40 1.00
0.39 0.70
0.33 0.60
0.33 0.55
0.32 0.50
0.27 0.48
0.26 0.47
0.25 0.41
0.23 0.40
0.22 0.39
0.21 0.38
0.16 0.35
0.13 0.27
0.10 0.20
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD-A
fixture in an Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
0603PS-822KL_
8.2
0603PS-103KL_ 10
0603PS-153KL_ 15
0603PS-223KL_ 22
0603PS-333KL_ 33
0603PS-473KL_ 47
20
5.69
12
0.10 0.18
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 266-1 Revised 03/14/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.