Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 347-1
Chip Inductors
–
0402PA (1005)
Halogen
Free
With current ratings as high as 1.8 A, Coilcraft’s 0402PA
wirewound chip inductors are ideal for power amplifiers
in TDMA, CDMA, GSM and other wireless applications.
fier and antenna and in the amplifier bias circuit. Like our
other ceramicchipinductors, theyfeatureoutstandingself-
resonant frequencies and excellent Q values. Most values
are available in 2% inductance tolerance.
Compared to our standard 0402CS Series, they can
handle up to 65% more current and have half the DC
resistance.These inductors are perfect for use as an RF
choke for the power supply, the LC tank between ampli-
CoilcraftDesigner’sKitC373containssamplesofall5%
inductance tolerance parts.To order, contact Coilcraft or
visit http://order.coilcraft.com.
Inductance2
(nH)
Percent
SRF typ5
(MHz)
DCR typ6
(Ohms)
Irms7
(mA)
900 MHz
L typ
Q typ4
1.7 GHz
Part number1
tolerance3
L typ
Q typ4
0402PA-0N8XJR_
0402PA-1N9X_R_
0402PA-3N4X_R_
0402PA-3N5X_R_
0402PA-5N8X_R_
0.78
1.9
3.4
3.5
5.8
5
0.79
1.83
3.36
3.51
5.76
35
50
51
58
56
0.76
1.81
3.33
3.55
5.70
55
73
93
82
83
15200
12500
7200
8750
5450
0.018
0.022
0.030
0.040
0.045
1860
1700
1500
1400
1300
5,2
5,2
5,2
5,2
0402PA-6N2X_R_
0402PA-8N2X_R_
6.2
8.2
5,2
5,2
6.17
8.15
57
58
6.28
8.19
81
82
4950
4650
0.055
0.060
1150
1100
1. When ordering, specify tolerance, termination and packaging codes:
Core material Ceramic
Environmental RoHS compliant, halogen free
0402PA-8N2XJRW
Tolerance: G = 2% J = 5%
Terminations RoHS matte Sn over Ni over Ag-Pt-glass frit. Other
terminations available at additional cost.
Termination:R = RoHS matte Sn over Ni over Ag-Pt-glass frit.
Weight 0.9 – 1.1 mg
Special order:
T = RoHS Sn/Ag/Cu (95.5/4.0/0.5)
S = Not RoHS Sn/Pb (63/37)
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise).
Packaging: W= 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Y = 7″ machine-ready reel. EIA-481 punched paper
tape. Factory order only, not stocked (10000 parts
per full reel).
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
U = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from U to W.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000 or 10000 per 7″ reel. Paper tape: 8 mm wide,
0.68 mm thick, 2 mm pocket spacing
2. Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture
and Coilcraft-provided correlation pieces with an Agilent/HP 4286
impedance analyzer.
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf..
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. For SRF >6 GHz, measured using an Agilent/HP 8722ES network
analyzer and a Coilcraft SMD-D test fixture. For SRF £6 GHz, measured
using anAgilent/HP 8753D network analyzer and a Coilcraft SMD-D
test fixture.
6. DCR measured on a micro-ohmmeter.
7. Current that causes a 15°C temperature rise from 25°C ambient.This
information is for reference only and does not represent absolute
maximum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 sales@coilcraft.com
Document 347-1 Revised 08/06/21
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
