Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 913-1
Chip Inductors – 0402HL (1005)
Halogen
Free
• 12 inductance values from 270 nH to 820 nH
• Higher inductance values than other 0402 ceramic chip
inductors
Inductance2
±±5 ꢀnꢁH
SRF typ4
ꢀMꢁzH
DCR max5
ꢀOhmsH
Irms6
ꢀmAH
Part number1
Q typ3
0402HL-271XJR_
0402HL-301XJR_
0402HL-331XJR_
0402HL-361XJR_
0402HL-391XJR_
270
300
330
360
390
11@25 MHz
11@25 MHz
11@25 MHz
11@25 MHz
11@25 MHz
590
600
513
485
260
1.95
2.15
2.23
2.36
2.35
190
190
170
170
170
0402HL-471XJR_
0402HL-511XJR_
0402HL-561XJR_
0402HL-601XJR_
0402HL-681XJR_
470
510
560
600
680
11@25 MHz
12@25 MHz
12@25 MHz
12@25 MHz
13@25 MHz
220
450
420
440
380
2.67
3.50
3.70
3.78
5.15
160
150
140
130
120
0402HL-741XJR_
0402HL-821XJR_
740
820
12@25 MHz
13@25 MHz
165
385
5.45
5.85
110
90
1. When ordering, please specify termination and packaging codes:
0402ꢁL-821XJRW
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
5. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF1010 test fixture.
6. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maxi-
mum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Special order: Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: W= 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
Designer’s Kit C4±3 contains 20 of each value
Core material Ceramic
U = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, sim-
ply change the last letter of your part number from
U to W.
Environmental RoHS compliant without exemption, halogen free
Terminations RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weight 0.7 – 1.3 mg
2. Inductance measured at 25 MHz using a Coilcraft SMD-F test fixture
and Coilcraft-provided correlation pieces with an Agilent/HP 4286
impedance analyzer.
3. Q measured using a Coilcraft SMD-F fixture in Agilent/HP 4287A
impedance analyzer or equivalent.
Ambient temperature –40°C to +125°C with Irms current,
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
4. SRF measured using Agilent/HP 8753D network analyzer and Coil-
craft SMD-D test fixture.
Maximum part temperature +140°C (ambient + temp rise).
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance ꢀTCLH +25 to +150 ppm/°C
Moisture Sensitivity Level ꢀMSLH 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 0.66 mm thick,
2 mm pocket spacing
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Amax Bmax Cmax
0.048 0.031 0.022 0.010 0.018 0.008 0.026 0.014 0.025 inches
1,22 0,79 0,56 0,25 0,46 0,20 0,66 0,36 0,64 mm
D
E
F
G
ꢁ
I
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Document 913-1 Revised 06/11/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.