Series X518 Single and Dual Row
Collet Sockets with Solder Tail Pins
FEATURES:
• Aries collet sockets are available in single or dual rows.
• Cuttable to the number of pins desired to fit the application.
• Side-to-side and end-to-end stackable.
SPECIFICATIONS:
• Body material is black UL 94V-0 Glass-filled 4/6 Nylon.
• Pin body is Brass Alloy 360 1/2 hard per UNS C36000 ASTM-B16-00.
• Pin body plating is either 10 μ [.25μm] min. Gold per MIL-G-45204 or
200μ [5.08μm] min. 93/7 Tin/Lead per ASTM B545 or 200μ [5.08μm]
min. Tin per ASTM B545 Type 1 over 100μ [2.54μm] min. Nickel per
SAE-AMS-QQ-N-290.
• 4-fingered collet contact is Beryllium Copper Alloy per UNS C17200
ASTM-B194-01.
• Contact plating is either 200μ [5.08μm] min. 93/7 Tin/Lead per ASTM
B545 or 200μ [5.08μm] min Tin per ASTM B545 Type 1 or 10μ [.25μm]
Gold per MIL-G-45204 over 50μ min. [1.27μm] Nickel per SAE-AMS-
QQ-N-290. Heavy 30μ [.76μm] Gold Plating also available.
• Contact current rating=3 Amps.
• Insertion Force=180 grams/pin; Withdrawal Force=90 grams/pin; Normal
Force=140 grams/pin; based on a .018 [.46] dia. test lead.
• Operating temperature=221°F [105°C] Tin & Tin/Lead plating
=257°F [125°C] Gold plating.
Note: Aries specializes in custom design and production. In addition to
the standard products shown on this page, special materials, platings,
sizes, and configurations can be furnished, depending on quantities.
Aries reserves the right to change product specifications without notice.
ORDERING INFORMATION
X X - X 518- 1X X X X
• Insertion Force=180 grams/pin; Withdrawal Force=90 grams/pin; Normal
Force=140 grams/pin; based on a .018 [.46] dia. test lead.
• Accepts leads .015-.025 [.38-.64] in diameter.
Optional suffix:
No. of pins:
H=Heavy Gold
Single row: 1-40 pins
plating on collet
Dual row: 2-40 pins
• Accepts lead lengths from .100 [2.54] min.
T=Tin collet/ Tin
MOUNTING CONSIDERATIONS:
•Suggested PCB hole size=.030 ± .002 [.76 ± .05] dia.
0=Single row
shell
1=Dual row
TL=Tin/Lead collet/
ALL DIMENSIONS: INCHES [MILLIMETERS]
Tin/Lead shell
E=Extra long solder
Series
All tolerances ± .005 [.13]
unless otherwise specified
tail pin
Solder tail pin
Plating:
0=Gold collet/Tin shell
0TL=Gold collet/
Tin/Lead Shell
1=Gold collet/Gold shell
“A”=(NO. OF PINS PER ROW) X .100 [2.54]
“B”=(NO. OF PINS PER ROW - 1) X .100 [2.54]
Consult Data Sheet No. 12021
for Series X518 Collet Sockets
with wire wrap pins.
EXTRA LONG “E”
SOLDER TAIL
Bristol, PA USA
TEL: (215) 781-9956
FAX: (215) 781-9845
12020
REV. G
http://www.arieselec.com • info@arieselec.com
abc
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED