Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1305-1
Miniature RF Chokes – 026011F
Halogen
Free
• Higher inductance value than most 0201 inductors
• Ferrite construction for low DCR and high current
handling
• High impedance for RF isolation in cellular applications
• Optimized 0201 size – 0.7 × 0.3 × 0.55 mm high
Impedance typ (Ohms)
Inductance2
±±5 (nꢀ)
SRF typ3
(Mꢀz)
DCR max4
(Ohms)
Irms5
(mA)
B dim max
(in / mm)
Part number1
900 Mꢀz
1.7 Gꢀz
026011F-270XJR_
026011F-720XJR_
026011F-101XJR_
026011F-151XJR_
026011F-271XJR_
27
72
100
150
270
135
380
470
850
1500
260
750
900
1900
4700
3900
2600
2300
1800
1600
0.125
0.460
0.570
0.680
1.30
480
210
200
190
130
0.015 / 0,38
0.013 / 0,33
0.013 / 0,33
0.013 / 0,33
0.013 / 0,33
026011F-431XJR_
026011F-561XJR_
430
560
2700
4500
8600
7500
1100
1000
2.10
3.10
100
90
0.013 / 0,33
0.013 / 0,33
1. When ordering, please specify packaging code:
026011F-±61XJRY
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver-
Packaging: W= 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
platinum-glass frit
Weight 0.9 – 1.1 mg
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +100°C (ambient + temp rise)
Y = 7″ machine-ready reel. EIA-481 punched paper
tape (10,000 parts per full reel).
U = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the
need for multiple packaging codes. When ordering,
simply change the last letter of your part number from
U to W.
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
2. Inductance measured at 7.9 MHz using a Coilcraft SMD-F test fixture
with an Agilent/HP 4287A impedance analyzer.
3. SRF is measured on an Agilent 8753ES (or equivalent) with a Coilcraft
SMD-D test fixture.
Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000 or 10,000 per 7″ reel. Paper tape: 8 mm wide,
0.68 mm thick, 2 mm pocket spacing
4. DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent)
with a Coilcraft CCF1192 test fixture.
5. Current that causes a 15°C temperature rise from 85°C ambient.This
information is for reference only and does not represent absolute maxi-
mum ratings. Because of their open construction, these parts will not
saturate.
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Because of its open construction, these parts will not saturate.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
B
H
overall
Pick and
place
material
C
G
F
D
D
A
G
E
Terminal wraparound:
approx 0.006/0,15 both ends
terminal
Recommended
Land Pattern
Amax Bmax Cmax
D
E
F
G
ꢀ
0.030
0,76
0.022 0.005 0.0110 0.016 0.010 0.014 inches
0,55 0,13 0,28 0,41 0,25 0,36 mm
See
table
Specifications subject to change without notice.
Document 1305-1 Revised 12/01/21
US +1-847-639-6400 sales@coilcraft.com
Please check our website for latest information.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg