SAKG 28 I
SAKG 28 II
Cable Lug 32/35 mm
DIN-Rail Terminals
Feed Through
The Weidmuller SAKG range offers the following connection
variations:
• Clamping yoke connection, Version III. The stripped
conductor can be connected without further preparation.
• Lug connection, Version II.
Two types of screw connection are provided here.
a) Screw set with lock nut
Available Options
Version
KrG 0170020000
0170320000
b) with thread in the busbar
• Clamping yoke/lug connection as a combination, Version I.
Dimensions
Width / Length / Height mm (in.) with TS 35 x 7.5
with TS 32
–
–
28/70/63.5 (1.1/2.76/2.5)
mm (in.) 15 (.59)
28/70/53 (1.1/2.76/2.09)
–
Insulation stripping length
Technical Data
Rated voltage / rated current / wire size
UL 600 V / 95 A / #2 AWG
600 V / 115 A / #2 AWG
CSA 600 V / 110 A / #6…1 AWG
600 V / 135 A / #8…2 AWG
2
2
VDE 1000 VAC / 110 A / 35 mm
1000 VAC / 110 A / 35 mm
Version I
Version II
without thread
Torque
Nm (lb. in.) 22.6 (200.0)
22.6 (200.0)
6
Clamping screw
M
6
End Plate, Hard Paper (thickness mm)
Type
EP 1 (2)
Part No.
0205100000
0205200000
Type
Part No.
0205100000
0205200000
For
EP 1 (2)
EP 1 (2)
Tropic-proof EP 1 (2)
For
Version II G
with thread
Version III
Tropic-proof
Cables with cable lugs are connected to
Partition, Hard Paper (thickness mm)
Version I SAKG terminals and SS stud terminals.
TW 1 (2)
0151400000
0164600000
TW 1 (2)
TW 1 (2)
0151400000
0164600000
Tropic-proof TW 1 (2)
Fitting instructions for SAKG terminals
When tightening the clamping screw, it is recommended that the
conductor be held against the tightening direction in order to avoid
any deformation of the mounting rail and to keep the terminal foot
free of torsional forces.
Jumpers
QL 2
QL 3
QL 4
0193900000
0407600000
0407700000
QL 2
QL 3
QL 4
0193900000
0407600000
0407700000
Note: Final number in model indicates
no. of poles (e.g. QL 2 = 2 poles). For
additional information, see Accessories
section.
QL
Cover
AH 28
0326660000
AH 28
0326660000
Cover
In order to ensure shock protection following connection of the
Marking Tags
Print
Consecutive horizontal DEK 5/5
conductors, Type AH hoods can be snapped onto the terminal.
Note: Part numbers shown are for a single
card of pre-printed tags numbered 1-50.
For additional information, see Accessories section. Consecutive vertical DEK 5/5
0473460001
0473560001
DEK 5/5
DEK 5/5
0473460001
0473560001
See Accessories section for mounting rails, end brackets, test taps, additional marking material and accessories.
150