Omni SD-DC — Speed control for DC fans
martFan Omni SD is a versatile switching
DC control which operates at a high-
S
frequency to achieve maximum power
efficiency at minimum size. Units are available
for nominal 12, 24 and 48 VDC operation.
Omni SD controllers apply a smooth DC voltage
to the air mover for absolute minimum noise.
They are compatible with temperature sensors
P1 through P9 shown on page 34. Control Tem-
perature is set by means of a jumper on the cir-
cuit board. Omni SD is supplied with an optically
isolated temperature alarm, triggered if sensor
temperature reaches 10°C above Control Tem-
perature or if cooling system power is lost.
2.40
(61.0)
2.00
(50.8)
0.20
(5.1)
1.10 MAX
(27.9)
For additional information see:
page 13 Design Considerations
page 34 Sensors
FEATURES
• Choose 12, 24, or 48 VDC nominal voltage ratings
• High pow er efficiency: typically greater than 90%
• Noise reduction: typically 15 dB(A) or more
at idle speed
• Constant idle voltage regardless of input voltage
• Optically isolated temperature alarm output sinks
up to 1.0 mA (normally closed)
0.156 D(4)
(3.96)
• Selectable Control Temperatures of 35°, 40°, or 45°C
(74°, 80°, or 86°C w hen P3 sensor is used)
SPECIFICATIONS
Supply Voltage
Range
Maximum Watts to Fans1
Part Number
Still Air
200 ft/Min
10-15 VDC
012D440
60 Watts/5.0 Amps
48 Watts/4.0 Amps
024D440
048D440
20-30 VDC
42-58 VDC
120 Watts/5.0 Amps
240 Watts/5.0 Amps
96 Watts/4.0 Amps
192Watts/4.0 Amps
H104
Hardware Pack
1Air Temperature of 55°C or less. See page 13 for derating above 55°C.
U.S. Patents 4,659,290, 4,722,699 and 5,364,026
CONTROL
RESOURCES
INCORPORATED
E-mail: sales@controlres.com
■
Web: w w w.controlres.com
32