Datasheet > 0-91047-3

0-91047-3

更新时间： 2024-01-09 12:51:02

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
2页	216K
描述
Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY.

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

0-91047-3 数据手册

Instruction Sheet

408-7384

Extraction Tools 91047-[ ]

11 MAY 10 Rev A

Outer Edge of Connector Housing

(Single-Row Connector Shown)

Locking Lance Slot

Extraction Tool

(Ref)

Flexible Flat Cable

(FFC)

Locking Lance

Blade

Figure 1

1. INTRODUCTION

EXTRACTION TOOL

Extraction Tools 91047-[ ] are designed to extract

flexible flat cable (FFC) contacts from FFC pin,

receptacle, and edge connectors with end entrance

locking lance slots (reference part number 86670-8).

Read these instructions thoroughly before removing

any contacts.

PART NUMBER

0-91047-1

0-91047-2

0-91047-3

0-91047-5

1-91047-0

1-91047-2

1-91047-4

1-91047-5

1-91047-6

1-91047-8

1-91047-9

2-91047-6

NUMBER OF BLADES

For connectors with side entrance locking lance slots,

refer to 408-7916 for Tool 91200-[ ].

Dimensions in this instruction sheet are in

millimeters [with inches in brackets]. Figures are

NOTE

not drawn to scale.

Reasons for reissue of this instruction sheet are

provided in Section 6, REVISION SUMMARY.

2. DESCRIPTION

Figure 2

Each tool features a specific number of tool blades

that release the contact locking lances of the

connector. See Figure 1. The number of tool blades

must match the number of cavities in one row of the

connector.

Proceed as follows:

1. Align the tool blades with the locking lance

slots located between the contacts and outer

edge of the housing as shown in Figure 1.

All contact locking lances must be released

CAUTION

simultaneously; otherwise, damage to the

connector, contacts, or cable may result.

2. Simultaneously insert all tool blades straight

into the connector until the tool bottoms. Only the

radius between the tool blades should be visible

when the tool is properly seated. See Figure 3.

3. EXTRACTION PROCEDURE

3. Holding the tool and connector in one hand,

carefully pull on the cable. A slight side-to-side

motion may be used to ease contact extraction.

Refer to Figure 2, and ensure that the number of

blades of the extraction tool matches the number of

contact cavities in one row of the connector.

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

1 of 2

TE logo and Tyco Electronics are trademarks.

*Trademark. Other products, logos, and company names might be trademarks of their respective owners.

LOC B

中文翻译

下载PDF

与0-91047-3相关器件

型号	品牌	获取价格	描述	数据表
0-91047-5	MACOM	获取价格	Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY.
09-10-5109	MOLEX	获取价格	IDT CHANGE HEAD Specification Sheet
09-10-5149	MOLEX	获取价格	IDT CHANGE HEAD Specification Sheet
09-10-5169	MOLEX	获取价格	IDT CHANGE HEAD Specification Sheet
0910-60M	ADPOW	获取价格	60 Watts - 40 Volts, 150us, 5% Radar 890 - 1000 MHz
0910-8-57-20-76-14-11-0	MILL-MAX	获取价格	PCB Terminal,
0910ASL132	LUMBERG	获取价格	Connectors & Components for Automation Technology
0910ASL133	LUMBERG	获取价格	Connectors & Components for Automation Technology
0910ASL134	LUMBERG	获取价格	Connectors & Components for Automation Technology
0910ASL135	LUMBERG	获取价格	Connectors & Components for Automation Technology

与0-91047-3相关文章

LTM4644/LTM4644-1：创新的四输出同步降压微模块调节器
2024-07-02

2
2N3500：一款多用途NPN硅晶体管的全面解析
2024-07-02

3
最详细资料解析：BA5917AFP参数说明、引脚说明
2024-07-02

5
MAX232IDR数据手册：产品特性、电气参数、替代型号推荐
2024-07-02

3

产品中心

服务支持

精选活动

关于我们

帮助中心

0-91047-3

0-91047-3 数据手册

与0-91047-3相关器件

与0-91047-3相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

0-91047-3

0-91047-3 数据手册

与0-91047-3相关器件

与0-91047-3相关文章

您还可以找

您在本页遇到什么问题？